Licensed & Insured, in Rockford and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Rockford
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (815) 420-4516 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Rockford and surrounding areas · On-site visits included · Free estimate within 24h
Rockford Metal Roofing is a team of local certified professionals based in Rockford. We respond quickly in Rockford and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (815) 420-4516⭐⭐⭐⭐⭐ 4.9/5 · 345 verified Google reviews
“We needed a metal roof on our pole barn out past the edge of town and these guys knocked it out in two days with a four-man crew. Straight lines, tight screws, and they hauled away every last scrap of old tin. Couldn't ask for a smoother job.”
Commercial & Agricultural Metal Roofing
“Had water sneaking in around the brick entry of our house every time it rained hard. They tracked it down to bad flashing, redid the whole transition, and we haven't seen a drop since. Fair price and they actually showed up when they said they would.”
Metal Roof Repair
“Our old barn roof was rusted through in spots and we figured we'd have to tear it all off. Instead they went right over the top with standing seam panels and it looks fantastic against the fields. The crew was respectful, cleaned up the whole yard, and even swept the driveway for nails.”
Standing Seam Metal Roofing
“Put a new metal roof on our single-story ranch and the whole thing took about three days. The color match on the trim was spot on and the ridge line is dead straight. Only gripe is they started a day later than promised, but the work itself is top notch.”
Metal Roof Installation
“They installed a vent cap on our roof after the old one started whistling in the wind. Quick job, reasonable price, and the guy explained exactly what he was doing before he climbed up. Nice to deal with a company that doesn't try to upsell you on a whole new roof.”
Flashing, Chimney & Skylight Repair
“Replaced our tired asphalt shingles with a stone-coated steel roof and honestly the house looks ten years newer. They handled the tear-off, the underlayment, everything, and finished ahead of schedule. Neighbors have already asked me who did it.”
Metal Roof Replacement
“Went with the retrofit over our existing shingles to save some money and I'm glad we did. Crew of three had it buttoned up in two days flat. The only hiccup was a little debris left in the gutters, but they came back and cleared it out without me having to argue.”
Metal Roof Over Shingles (Retrofit)
“Brand new corrugated metal roof on our place and it's been through two nasty storms already without a single issue. They walked me through the snow guard options since we get ice dams bad out here, and I appreciated the honesty. Solid work from start to finish.”
Metal Roof InstallationReal photos of our work in Rockford · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener metal roof installation | Starting at $8/sq ft | Corrugated or ribbed panels with underlayment and basic trim; price rises with roof pitch and complexity. |
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed fasteners, raised seams and premium finish; higher cost for steep roofs and multiple dormers. |
| Metal shingle or stone-coated steel installation | Starting at $14/sq ft | Stamped or stone-coated panels for a traditional look; historic district and HOA approval may add time. |
| Metal roof over shingles (retrofit) | Starting at $9/sq ft | Battens over one existing layer where code allows; saves tear-off cost but requires deck inspection. |
| Complex or large-scale job | On estimate | Multiple valleys, chimneys, skylights or deck repair need an on-site look before a firm number is given. |
| Estimate | Free | Response within 24 hours at (815) 420-4516, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, simple gable | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard trim on a straightforward gable roof. |
| Mechanically seamed, complex roof | Starting at $14/sq ft | Includes double-lock seams, custom trim, and flashing for dormers, valleys, and chimneys. |
| Standing seam over existing shingles | On estimate | Retrofit pricing depends on deck condition, existing layers, and code limits on recover. |
| Historic or HOA-reviewed profile | On estimate | Specific profile or color requirements add material cost and review time before ordering. |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener replacement | Starting at $9/sq ft | Includes tear-off, underlayment and corrugated or ribbed panels on a simple roof |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and formed panels, price rises with pitch and detailing |
| Metal shingle or stone-coated steel | Starting at $13/sq ft | Includes tear-off and stamped or granule-coated panels, higher on steep historic roofs |
| Complex or large-scale job | On estimate | Multiple dormers, chimneys, rotten decking or tight access need an on-site look first |
| Travel | Included | in Rockford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes deck inspection, slip sheet, and standard flashing on sound sheathing. |
| Retrofit over two layers of shingles | Starting at $8.50/sq ft | Adds layer verification, thicker separation, and longer fasteners for the extra depth. |
| Steep or complex roof retrofit | On estimate | Steep gables, multiple valleys, and chimneys need an on-site look before pricing. |
| Deck repair during retrofit | On estimate | Soft spots and rot found during inspection are quoted separately before work continues. |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (seam reseal, single fastener) | Starting at $450 | Includes service call, diagnosis, and a small reseal or fastener replacement with metal-rated sealant |
| Panel replacement | Starting at $650 | Includes removal and replacement of one damaged panel, with profile and color matching to the existing roof |
| Flashing rebuild (chimney or skylight) | Starting at $850 | Includes removal of failed flashing, new metal and counterflashing, and a water test at the penetration |
| Storm or hail damage repair | On estimate | Needs an on-site look to count panels, check for hidden damage, and document for insurance review |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and repair | Starting at $450 | Covers inspection, one localized fix such as a boot or fastener row, and re-test. |
| Flashing or penetration rebuild | Starting at $650 | Rebuilds chimney, skylight, or sidewall flashing with new metal and proper laps. |
| Multiple leak points or fastener field | Starting at $900 | Replaces several failed fasteners or boots across the roof plane in one visit. |
| Emergency tarp and storm response | Starting at $350 | Same-day tarping to stop active water, credited toward the permanent repair. |
| Complex or large-scale job | On estimate | Needs an on-site look when the cause spans seams, panels, or ice-dam detailing. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted screw replacement (single slope or porch) | Starting at $750 | Covers pulling and replacing failed screws and washers on one small area, access permitting. |
| Full-pattern re-fastening (average ranch or Cape Cod) | Starting at $1,450 | Replaces every fastener on the affected slopes with oversized screws and UV-resistant washers. |
| Loose panel re-seating after wind | Starting at $950 | Resets lifted panels, replaces wallowed fasteners and re-seals the affected runs. |
| Rusted fastener extraction (barn, shop, older panel) | On estimate | Seized or snapped screws need hole treatment and sealing, so we look before quoting. |
| Travel | Included | In Rockford and surrounding Winnebago County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel installation | Starting at $5.50/sq ft | Includes panels, underlayment, closures and standard trim; price rises with roof pitch and access difficulty |
| R-panel (ribbed) installation | Starting at $6.25/sq ft | Stronger rib profile with sealed laps; cost moves with flashing complexity and panel color selection |
| Retrofit over existing shingles | Starting at $5.75/sq ft | Panel system over existing layers where code allows; savings depend on layer count and deck condition |
| Barn, shop or pole building | Starting at $4.75/sq ft | Large simple roof areas lower the per-foot rate; travel to rural Boone County sites is included |
| Complex or large-scale job | On estimate | Multiple valleys, dormers, chimneys or historic review require an on-site look before pricing |
| Estimate | Free | Response within 24 hours at (815) 420-4516, no obligation to book the job |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, simple ranch or Cape Cod | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, ice and water shield, shingles, and standard flashing. |
| Steep or cut-up roof with dormers and valleys | Starting at $12/sq ft | Pitch, dormers, valleys, and multiple penetrations add labor and custom flashing time. |
| Stone-coated or premium slate-profile shingles | Starting at $14/sq ft | Higher material cost for stone-coated finish or period-correct slate profiles on historic homes. |
| Deck repair or re-sheathing | On estimate | Soft sheathing, rot, or bad rafter tails need an on-site look before we price the repair. |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation | Starting at $9/sq ft | Includes panels, underlayment, standard flashing and cleanup on an accessible roof. |
| Retrofit over existing shingles | Starting at $7/sq ft | Covers panels and new underlayment over one sound layer, subject to code limits. |
| Full tear-off and replacement | On estimate | Old layers removed, deck inspected and repaired, new system installed; scope needs an on-site look. |
| Complex roof with dormers and valleys | On estimate | Steep pitch, multiple penetrations and tight access raise labor; we measure before quoting. |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay accent | Starting at $20/sq ft | Includes custom-formed panels, underlayment and flashing for a small accent roof. |
| Full copper standing seam roof | Starting at $28/sq ft | Includes concealed-fastener panels, soldered valleys and ice-and-water shield. |
| Zinc or aluminum accents | Starting at $18/sq ft | Includes formed flashing, valleys and accent panels on dormers and chimneys. |
| Custom fabrication and repair | On estimate | Historic profiles and curves need an on-site look before we quote a number. |
| Travel | Included | in Rockford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard coating, single-story roof | Starting at $2.50/sq ft | Includes wash, light prep and one finish coat on sound panels with minor chalking |
| Rust treatment and primer plus topcoat | Starting at $3.75/sq ft | Adds wire-brush rust removal and rust-inhibitive primer on streaked panels and fasteners |
| Steep-pitch or multi-level roof | Starting at $4.50/sq ft | Higher rate reflects fall protection, staging and slower hand work on steep gables |
| Large commercial or agricultural building | On estimate | Square footage, roof height and access determine the rate, so we walk it first |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight curb re-flash (single unit) | Starting at $600 | Includes removal of failed sealant, new curb flashing with back pans and kick-outs, and water test. |
| Chimney step and counterflashing rebuild | Starting at $950 | Includes cutting new step flashing into the masonry joint and installing bent counterflashing with sealed laps. |
| Chimney pan, cricket and counterflashing rebuild | Starting at $1,400 | Custom-bent pan and cricket for wide chimneys; steep pitch and height raise the labor and safety setup. |
| Valley or dormer transition flashing | Starting at $750 | Replaces open valley metal or dormer sidewall flashing; rotten sheathing behind the metal adds to the scope. |
| Complex or large-scale job | On estimate | Multiple penetrations, turret roofs, or hidden rot need an on-site look before we give a number. |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single roof plane, pad-style guards | Starting at $1,200 | Includes guard material, fasteners, layout and labor for one plane with standard ladder access. |
| Multi-plane residential layout | Starting at $2,100 | Covers two to three planes with row counts set by pitch and snow load, priced by plane. |
| Bar, rail or pipe snow fence system | Starting at $2,800 | Continuous rail or pipe fence clamped or fastened to seams for steep pitches and long drop zones. |
| Eave and valley ice protection | Starting at $900 | Ice-and-water membrane and eave detailing at the valleys and eave line where ice dams form first. |
| Complex or large-scale job | On estimate | Steep Victorian roofs, lift access or panels needing re-fastening first require an on-site look. |
| Estimate | Free | Response within 24 hours at (815) 420-4516, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photo documentation, and written repair versus replacement assessment, no obligation |
| Minor storm repair | Starting at $350 | Screw replacement, re-securing lifted panels, and re-sealing seams on a limited area |
| Panel replacement | Starting at $850 | Cut out and match a punctured or crushed panel, including flashing check and water test |
| Flashing and penetration repair | On estimate | Chimney, skylight, or valley flashing rebuild after storm or ice damage; scope varies by roof |
| Travel | Included | In Rockford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic visual inspection | Free estimate | Ground and roof-level walk-through with photo documentation, priced by roof size and pitch |
| Full inspection with written report | Starting at $249 | Fastener, seam, flashing, and coating check with written findings and photos, priced by penetrations |
| Insurance documentation report | Starting at $349 | Photo log and formatted findings for claim submission, priced by roof size and damage extent |
| Complex or steep-slope roof | On estimate | Multi-level, steep, or historic homes need an on-site look before we quote the inspection |
| Travel | Included | in Rockford and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (815) 420-4516, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, 5-inch | Starting at $9/linear ft | Includes on-site forming, standard hangers and downspout connections; run length and access move the price. |
| Seamless aluminum gutter, 6-inch | Starting at $12/linear ft | Higher capacity for large roof areas and steep pitches; hanger spacing and snow hardware add to the figure. |
| Screens and gutter guards | Starting at $4/linear ft | Sized for maple seeds and leaves; tree load and roof pitch decide the guard type and the final rate. |
| Snow-rated hanger upgrade | Starting at $3/linear ft | Tighter spacing and slide-resistant hardware for metal roofs; steep pitches and tall access raise the cost. |
| Fascia repair and re-hang | On estimate | Rot, loose trim and damaged hangers need an on-site look before we can quote the repair scope. |
| Estimate | Free | Response within 24 hours at (815) 420-4516, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | Roof walk, photos of every failure point, and a written scope separating repair from replacement |
| Screw replacement and re-fastening | Starting at $450 | Worn washers and backed-out screws replaced on exposed-fastener panels, priced by square and access |
| Targeted leak and flashing repair | Starting at $650 | Ridge, vent and penetration flashing repaired, priced by the number of leak points found |
| Panel replacement or new install | On estimate | Span, slope, purlin condition and insulation all affect the number, so we measure on site first |
| Travel | Included | In Rockford and surrounding Winnebago, Boone and Ogle county areas, no separate mileage fee |
| Estimate | Free | Response within 24 hours at (815) 420-4516, no obligation to book the work |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Rockford need a crew that understands what these roofs actually face: steep gabled pitches on Victorian and Foursquare homes, heavy tree cover from silver maples and burr oaks, deep freeze-thaw cycles off the Rock River, and a large stock of aging screw-down roofs whose fasteners are reaching the end of their service life. Rockford Metal Roofing is your local source for metal roof installation, replacement, re-roofs, and repair, whether you own a 1920s bungalow on the east side or a newer subdivision home in Roscoe.
We serve Rockford, Loves Park, Machesney Park, Roscoe, Rockton, and the surrounding Winnebago County communities with a network of licensed, insured local contractors who know this housing stock firsthand. From a single leak call to a full standing seam install, we give straight guidance on what your roof needs and what it does not. Start with a free estimate and we will walk the roof with you.
Most metal roof leaks in Rockford trace back to a short list of causes, and the leading one on 15 to 30 year old exposed-fastener roofs is fastener failure. The EPDM sealing washers under each screw dry out, shrink, and crack with sun and freeze-thaw cycling, leaving a gap where water enters. Seams separate as panels expand and contract with temperature swings. Pipe boots, chimney flashing, skylight curbs, and valley metal fail at their sealant joints. Wind-lifted panels after a squall and punctures from fallen limbs round out the picture. None of these are mysterious, and all of them are fixable.
Ignoring a small leak is what turns it expensive. Water tracks along purlins and decking, so the stain on your ceiling may sit many feet from the actual entry point. By the time it shows, sheathing can be rotted and insulation soaked. Our metal roof leak repair service finds the true source, not just the wet spot, and addresses the failed component.
Here is the honest call: if the panels are sound and the problem is fasteners and sealant, a full screw replacement with new sealing washers often restores a watertight roof for a fraction of replacement cost. If panels are corroded through or the deck is compromised, replacement is the right answer. We tell you which one you are facing. Call (815) 420-4516 or request a free estimate.
We install the full range of metal systems and match the system to the home, not the other way around. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a premium, low-maintenance roof with clean lines. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, pole buildings, shops, and budget-conscious homes. Metal Shingle Roofing and Stone-Coated Steel Roofing suit homeowners who want a traditional look with metal durability, while Copper & Specialty Metal Roofing handles accents, bays, and historic profiles.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain; screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option. When it is not, tear-off is the right call.
Metal roof projects in Rockford are typically quoted per square foot for installations and often flat-rate for repairs. Final pricing depends on the roof and site conditions: panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Expect typical ranges rather than a single number until we have seen the roof. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection so we can give you real numbers for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise a claim will be approved. On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices.
Requirements vary, always verify with the Rockford building or planning department before starting your project. Have questions about documentation or next steps? Contact us.
Ready to get started? Rockford Metal Roofing serves in Rockford and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Rockford · Response within 24h · No commitment · ☎ (815) 420-4516
Your Free Quote Request